DIGITAL DEVICES

 

¤ Panel cutout -90 x 90 mm
¤ Six (6) digit display, 8mm LED
¤ Supply - 110V/ 230V, 50 Hz, 5 VA/12 to 24 V DC, 100 mA
¤ Preset in SET mode for each digit
¤ input - Non contact, open collector
¤ Output - 2 pairs of potential free contact ( 230v/6 A, 50 Hz, open collector )
¤ Memory - Last count 72 hours

  Block Rotor Protector (Model DC-9090BRP)

¤ Panel cutout -90 X90 mm
¤ Six (6) digit display, 8mm LED
¤ Supply-110V/230V, 50Hz, 5 VA /12 to 24 V DC, 100mA
¤ Preset in SET mode
¤ Input- Non contact, open collector
¤ Output-2 pairs of potential free contacts
  (230V/6 A, 50 Hz, open collector)

  Die Height Counter (Model DC-9090 DHC)

¤ Panel cut out - 90 x 90 mm
¤ Six(6) digit display, 8mm LED
¤ Supply-110V/230V, 50 Hz, 5 VA/12 to 24 VDC,100 mA
¤ Preset in SET mode for each digit for 2 levels
¤ Reset, (remote optional)
¤ Input- Built-in Encoder
¤ Output-2 pairs of potential free contacts (230V/6A, 50 Hz, open collector)
¤ Memory- Last count 72 hours

 

¤ Direct drive-compatible to CE's CPR 5
¤ Five (5) digit display, 8mm LED
¤ Supply-230V, 50 Hz, 5 VA/12 to 24 V DC, 100 mA
¤ Preset in SET mode for each digit up & dn count
¤ RESET  & change direction switch (CB/DB)
¤ Direction-Auto 
¤ Input -Built in sensor
¤ Output- NC for forward & NO for reverse (230/6A,50Hz, open collector)
¤ Memory-Last count 72 hours

 

¤ Direct drive -Suitable for 6000 RPM
¤ 5/6 digit display, 8mm LED
¤ Supply-230V, 50Hz, 5 VA/12 to 24 V DC,100 mA
¤ RESET & change direction switches (CB/DB)
¤ Direction- Auto -Add/Subtract
¤ Input- Built in sensor
¤ Memory- Last count 72 hours

  Electronic Measuring Machine Counter (Model ELCMMC)

¤ Direct drive -With 1/3 & 1/2 M wheels compatible to CE measuring    machines.
¤ 5/6 digit display, 8mm LED
¤ Supply-230,50Hz,5 VA/12 to 24 VDC, 100 mA.
¤ RESET & change direction switch (CB/DB)
¤ Direction- Auto-Add/Subtract
¤ Ratio- 5:1, 10:1, 1:2, 1:3, 1:5, 1:10 etc.
¤ Memory-Last count 72 hours